Home > Solutions > Content

Common Sense of CMM Probe Usage

Nano (Xi'an) Metrology Co.,Ltd | Updated: Sep 07, 2017
Source:

The probe head is an important part of the coordinate measuring machine(CMM), which plays an important role in the application of the CMM. The probe head can be divided into two types: scanning head and trigger head, and the current CMM uses the most of the trigger head. 

11.jpg

1. The initial volume of the trigger head is smaller when the measurement space is narrow.

2. The part is concerned with dimensions (such as small thread bottom holes), spacing or position, without emphasizing its shape error (such as locating pin holes);

Because of the mechanical industry need to measure a large number of geometrical quantity, concern is only part of the work-piece size and location, so most of the CMM on the market at present still use touch trigger probe, especially the medium accuracy machine.



Please inform us if any questions or advice

E-mail: overseas@cmm-nano.com



Feedback
Your comments are welcome!
For more information about our brand and products, please feel free to contact us!
Please enter your email address:
Contact us
Address: NO.55, Gongye No.2 Road, Xi'an National Civil Aerospace Base, Xi'an City, Shaanxi Province, China
Tel: +862981538937
Fax: +862989233633
E-mail: overseas@cmm-nano.com
Copyright © Nano (Xi'an) Metrology Co.,Ltd All rights reserved.