Views: 0 Author: Site Editor Publish Time: 2022-09-21 Origin: Site
The gantry image measuring instrument is used to measure the two-dimensional plane size and is widely used in various precision industries. It is mainly used for the size and angle of parts that are difficult or impossible to measure with calipers and angle rulers, but play an important role in assembly, and can also be used to take pictures of some parts and components for analysis of defects. reason.
1. The magnification of the camera lens of the image measuring instrument can be adjusted from 20 times to 180 times, etc. If the projector wants to change the magnification, it needs to replace the camera lenses one by one and buy a lot of camera lenses
2. The image can be output to the electronic computer, and the surveying and mapping project can be saved on a mobile phone software. Can carry out photography, copying, storage.
3. It can check the specifications of buried holes and pipe trenches on the upper surface of the tested block. The image and tone on the surface of the product workpiece can be clearly seen.
4. All the products that the projector can measure can be measured by the imager, but most of the products that the projector can measure cannot be measured.
5. The fully automatic model can also complete the program writing and automatic running program flow measurement.
1. When using the machine, turn on the power of the machine first, and then turn on the measurement software. When shutting down the machine, first close the measurement software, and then power off the machine. Prevent measurement application and data loss.
2. The maximum load-bearing capacity of the gantry image measuring instrument is about 80 kilograms. Use it with caution according to the measuring objects in the standard, and handle the measuring objects with care to prevent drawing on the plexiglass platform.
3. Do not push the workbench when it is powered on to prevent electric shock from being burned.
4. Tools or other items cannot be placed within the moving range of movable parts such as the workbench, and it is forbidden to place irrelevant heavy objects on the equipment, so as not to affect the normal operation of the machine. Do not touch it with your hands to avoid pinching your hands.
5. It is not allowed to arbitrarily change the set working parameters that affect the measuring instrument, so as not to affect the accuracy of the machine measurement.
6. The touch screen should avoid the proximity of magnetic substances.
7. It is not allowed to move or pull out the USB program control U disk on the host computer, and it is also not allowed to connect the external U disk, memory card, etc. to the host computer.
8. If a certain axis does not run smoothly during operation, do not pull it hard. First check whether there are sundries or other abnormalities on the shaft. If it cannot operate normally, please notify the relevant professionals for maintenance, and do not disassemble the machine for maintenance without permission.
9. In the cross guide rail of the mobile platform, the guide rail should be lubricated once a month to ensure the normal operation of the mobile platform.
10. The machine should be restarted once within 24 hours of operation. Do not use it for a long time without interruption. Let the machine rest properly to prolong the service life of the machine.
